Glue nozzle wipes (200 pcs)
3,70 €The adhesive build-up is causing your glue nozzle to become blocked?
Try Biodegradable Lint-free glue nozzle wipes. These wipes help you to keep your glue nozzle always clean which will provide you with the following benefits: A cleaner glue nozzle will allow you to use the glue bottle longer and more fully.
Tip:
Don’t forget to use the wipe when you shake your glue – simply remove the cap, place the wipe folded in half over the glue nozzle, press tightly and shake for the time required. This simple trick will help you to avoid the glue getting into the cap and prevent the cap from being stuck to the glue nozzle.
Product details:
- Biodegradable
- 200 wipes in the box
- Lint-free
- Liquids do not seep through and therefore do not stain your hands
How to use the wipes:
- Take the glue wipe from the box and fold it in half;
- Open the glue and cover the nozzle tip with the wipe;
- Shake your glue bottle (keep the nozzle tightly covered with the wipe to avoid any glue spillage);
- Dispense the glue onto the Glue stone or into the Glue Ring and wipe the glue nozzle with the same wipe that you used for shaking.
Volume discount applies to bulk purchases. Ask separately about the possibility of buying and the price in bulk.
Glue remover from tweezers
13,00 €Ever had a sticky situation where the adhesive creeps on your tweezers, making picking up fine eyelashes harder than it already is?
Stop picking off the dried glue with your finger nails or your extra pair of tweezers. Our new glue remover for tweezers will make the cleaning process 100 times easier and ensure your tweezers remain clean and shiny!
It’s quick and easy to use. Simply dip the tip of your tweezers in the jar and twist into the sponge ball at the bottom for 1-3 seconds – or until clean.
- 15 ml / 0.5 fl oz
- Double cork for long-lasting use and freshness
Please Note! Ensure the airtight inner lid is replaced after every use to keep product fresh!
Glue shaker
29,00 €Problems with lash retention? One of the reasons for this could be the inconsistent proportion of the glue ingredients in the bottle throughout the glue’s lifetime. In order to avoid this problem – you always need to shake your glue very well.
How to correctly shake your lash adhesive? Of course, you can opt for “old school” manual shaking, but it’s very time consuming and it still doesn’t guarantee you the perfect results!
Our recommendation – ALWAYS use a Glue Shaker.
What’s so great about it?
- No more wrist strain from manual shaking
- 5-15 seconds mixing time VS 1-2 minutes of manual shaking, which gives you more time to lash!
- Thoroughly mixed glue guarantees a perfect retention
- No glue stuck in the nozzle
- Easy to assemble
- Compact and lightweight, it looks super cute on your lash trolley
Do you want to improve the durability of your eyelashes even more? Check out our products designed to extend the life of eyelashes:
Product details:
- White & gold colour, with London Lash logo
- 3 levels of speed
- USB chargeable
- Improved design for better longevity
- The box contains: 1 x glue shaker, 2 x rubber attachments, 1 x USB cable
How to use:
- Insert the glue lid into the rubber holder, covering just over half the lid, ensuring it is secure but does not become stuck. There is no need to push the entire cork inside the rubber tip.
- Hold the shaker so that the glue is the right way up.
- Press the power button and allow the glue to spin for a few seconds. To increase the speed level – press the power button once (speed lvl 2) or twice more (speed lvl 3).
- Recommended shaking time:
- 5 seconds – highest speed
- 10 seconds – medium speed
- 15 seconds – slowest speed
- Gently squeeze the rubber to break the vacuum seal (pull the bottle sideways rather than downwards as this creates a vacuum) and gently pull the glue bottle out.
IMPORTANT! Please be careful when inserting the rubber attachment. Too much pressure can result in damage to the white bolt.
Glue Stop (5ml)
Original price was: 18,00 €.10,00 €Current price is: 10,00 €.We know how annoying it is when you make a perfect eyelash fan, but the glue closes it completely! We have a solution! This product is designed to help you avoid these problems. “Glue Stop” stops the glue, preventing it from flowing uncontrollably down the eyelash and closing the eyelash fans. Use this product to make all your fans open beautifully.
PH level: 8
Use:
With the built-in micro brush, apply the product to the false eyelash tape (1mm from the eyelash base). Wait for the “Glue Stop” to dry. Once the product has been applied and dried, proceed with the lash extension as usual. Reapply the product if after some time the eyelash fans start to close again.
Storage:
- Shelf life: 36 months from date of manufacture (see bottle).
- 12 months shelf life once opened.
Ingredients: Ethyl alcohol; Purified Water; Acrylates Copolymer
GOLD – Eyelash extension adhesive 5ml
25,00 €Meet our latest glue – this glue is made in Europe. It was produced to minimize the possibility of an allergic reaction. If your customers have sensitive eyes or have allergic reactions, or you yourself have allergic reactions, then this glue is designed to help you in these situations. Even if you haven’t experienced this, know that the high quality of this glue will reduce your chances of encountering this problem. The glue has been given the status “Medical grade”. The cyanoacrylate and other ingredients are of the highest quality, without toxic and carcinogenic impurities. The smell and fumes of the glue are reduced to a minimum, so there is less risk of an allergic reaction. The glue is manufactured in Europe and will comply with all EU requirements, standards and regulations.
Product features:
- Drying time: 1 second
- Retention: 7-8 weeks
- Recommended temperature: 19-24 °C
- Recommended humidity: 30-60%
- Medium liquid consistency (syrup consistency)
- Black colour
- “Medical grade” adhesive
- Flexible after curing
This product:
- Contains no added formaldehyde
- Latex free
- Without parabens
- Water resistant
- Heat resistant
- Oil resistant
- Suitable for all eyelash extension techniques
PLEASE NOTE:
Incorrect work with fast-drying adhesive can cause poor retention. This glue is recommended for experienced professionals. High temperature and/or high humidity causes an accelerated polymerization of the glue, which can affect the wear time of the eyelashes.
Note that this glue may not help with allergic reactions and irritation in all cases. If you or a client has developed an allergy to individual acrylates or the entire group of acrylates, the reaction may also appear. t will usually be lighter and reduced, but can still appear. In this case, you need glue without acrylates, including polyacrylates. f you or the client had before any allergic reaction, we recommend that you perform an allergy diagnostic test (Patch test) to find out what exactly you are allergic to before you do eyelash extensions.
All our adhesives have a European Safety Certificate (MSDS). You can view it by clicking here
Improved “Booster” 5ml
16,50 €The improved “Booster” is three products in one. It works like a primer, glue accelerator and refines glue spots. No other pre-treatment is necessary anymore. It also compensates for humidity fluctuations. PH 4 – this is the optimal PH level to not damage lashes in the long term. Regular Boosters have high PH levels, which open the eyelash cuticles, leave them like that, and draw moisture out. In the long term, this leads to weak and fragile lashes.
How to use: Drop a little bit onto a microbrush and dab the excess. Then apply it to the natural lash on the so-called “glue contact zone”. If you feel that glue slows down, then reapply the improved “Booster” again.
Attention! This product is a glue accelerator, and in high humidity or heat, glue may work too fast, which can lead to poor eyelash extension retention.
Sometimes you can see some sediment in the bottle, which is normal, because we have used natural ingredients. You don’t have to worry about them, and they won’t cause any harm.
Made in Europe, vegan, based on natural ingredients.
Ingredients: Aqua, SD-Alcohol 39-C, Polysorbate 20, Propylene Glycol, Phenoxyethanol, Cucumis Starivus, Sodium Chloride, Pathenol, Hamamelis Virgiana Distilate, Glycine Soja Seed Extract, Parfum, Allaton, Benzoid Acid, Dehydroacetic Acid, Ethyhexylglycerin, Lactic Acid, Potassium Sorbate, Sodium Benzoaete,
Improved “Superbonder” 5ml
16,50 €This product hardens eyelash glue within approximately two minutes, which allows for immediate water contact. A product that is right now accesible in practically all studios. But WHY do we need to improve when everyone is already providing them? Common “Superbonders” are made on a strong alcohol base, which dries the glue and makes it hard, inflexible, which often leads to poor durability. Strong alcohol makes the glue even shrink, which is another reason why lashes fall out quickly. Have you ever had a customer tell you their eyes hurt after using Superbonder? This is because when fresh glue comes into contact with regular Superbonders, vapors occur due to the alcohol, which irritates the eyes!
We managed to improve the regular “Superbonder” and have made a vegan product using mainly plant-based ingredients. Immediate water contact is possible. At the same time, the edges of the lid are maintained. Unlike the usual “Superbonder”, our product can come into contact with the eyelids, and we even recommend it because our product has an antibacterial and nourishing effect on the eyelids.
Benefits of this product:
- An antibacterial and nourishing effect on the eyelid
- Instant Hardening
- Reduces irritation and sensitivity.
- Your client can get their lashes wet three minutes after treatment.
- Works with ANY adhesive.
- Without parabens
- No mineral oils
- No silicones
- No methacrylate
How to use:
- Once you have completed the treatment, wait 2 minutes.
- Squeeze 1 small drop of Superbonder onto a microfiber brush and apply to the adhesive bonding point and eyelids.
- Allow the air to dry, and the lashes are safe to get wet just 2 minutes later!
Sometimes you can see some sediment in the bottle, which is normal, because we have used natural ingredients. You don’t have to worry about them, and they won’t cause any harm.
Made in Europe, vegan, based on natural ingredients.
Ingredients: Aqua, Glycerin, SD Alcohol 39-C, Sodium Chloride, Polysorbate-20, Propylene Glycol, Phenoxyethanol, Cucumis Starivus, Panthenol, Hamamelis Virgiana Distillate, Glycine Soja Seed Extract, Citrus Limon Fruit Extract, Parfum, Allantoin, Benzoid Acid, Dehydroacetic Acid, Ethylhexylglycerin, Potassium Sorbate, Sodium Benzoate, Lactic Acid
InLei “Brow Lift” 1.step (1.2 ml)
4,30 €InLei® “BROW LIFT 1” is an effective perm solution on the hair but also suitable for contact with the skin.
The ingredients included in the product are of Italian origin only. Ph (9-9.50), which is optimally adjusted for a particularly gentle effect on eyebrow hairs, allows quick and delicate penetration into the depths of the hairs. Contains purified (99%) vegetable glycerin, which is natural and provides hypoallergenic protection for sensitive eyebrow skin. No additional protection is required. Use only with other products of the InLei line!
InLei “Brow Lock” step 2 (1.2 ml)
4,10 €Brow Lock 2 – is the second step in InLei’s “Brow Bomber” product line.
The fixing composition is based on hydrogen peroxide, which fixes the desired direction and shape of the eyebrows. In terms of percentage, the formula is perfectly developed, which ensures stable operation and the highest quality interaction with the first and third composition during the procedure. Ph level (2.5 – 3.5)
InLei “FILLER 3” (1.2ml)
7,40 €InLei® Filler 3 is the final product used in the Lash Filler treatment. The filler thickens and nourishes the hair root, acting on it in the following months after the procedure, and also affects the proliferation (reproduction) of the hair molecules that make it up.
InLei “FILLER 3” (4 ml)
42,45 €InLei® Filler 3 is the final product used in the Lash Filler treatment. Thanks to its original formula, the micro particles of the Filler 3 penetrates the hair gently, bonding to the keratin fibres of the hair itself, resulting in thicker lashes by up to 24% over the course of three treatments!
The unique formula of the filler allows the microparticles of the composition to gently penetrate the hair fiber. Thanks to the synthetically obtained peptide component BIOTINOL TRIPEPTIDE -1 and the previously chemical preparation process, it stably combines the peptide molecules with eyelash or eyebrow keratin (it works and guarantees the result only when used together with InLei® “FORM 1” and “FIX 2”).
The filler thickens and nourishes the hair root, acting on it in the following months after the procedure, and also affects the proliferation (reproduction) of the hair molecules that make it up.
Conveniently designed packaging allows you to use the product for two to three months. Thanks to the pipette it is equipped with, it is convenient to take the product from the bottle, avoiding the loss of the product.
InLei “Filler 3” Can be used as an oil to strengthen eyelashes and eyebrows. But in this case, it should be used daily and applied with massaging movements for 1-2 months.
Volume: 4 ml
In the package: 1 pc.
Made in: Italy
PH: 7,00 – 8,00